-
Copper rolls are available in 12, 25, and 50-pound rolls. Please note that only .7 Mil copper is available in 12 lb. rolls. All other rolls are 25 pounds. 16 and 22 Mil gauge features 25 and 50-pound rolls.
-
Conductive Copper Tape consists of a .0014" (1.4 mil) thick 110 annealed electrolytic tough pitch copper that is highly conductive backed by a 2 Mil electrically conductive acrylic transfer adhesive. This copper adhesive tape is designed for laminating to a variety of surfaces including painted surfaces, metals, and various plastic films. It features good chemical resistance and has moderate tack and high shear strength.
- Adhesive thickness: 2 Mils.
- Width: 3"
- Liner type: 76# Polycoated.
- Peel adhesion (PSTC - 101/180°)
- Initial to SS (20 min @ RT) — Oz./Inch: 47 & N/25mm: 13.2.
- Holding power (PSTC 107 Mod./178°) 2.2 PSI (1" x 1" x 1000g) @ RT — ≥ 600 min.
- Volume resistivity (ASTM D2739-97 Modified): 0.06Ω·m
- Observed resistance (ASTM D2739-97 Modified): 5m Ω
-
Copper Nails are best described as having a large, flat head, annular ring and diamond points. They are frequently used on projects such as roof flashing and other roofing installations.
- Pure Copper
- CU110 (99.9%)
- Flat Head
- 11 Gauge
-
Pure Copper Tacks feature a flat head, sharp point, tapered body, and an angular cut shank to resist pull-out.
- CU 110 (99.9%)
-
Nimrod Copper Grab Bag! The Nimrod Copper Grab bag is a great value to crafters who need odd-size pieces of copper for the low price of $29.00 USD. If you are an incidental copper user, this grab-bag of copper foil is perfect for your ad hoc projects. Each Nimrod Copper Grab Bag contains about 1-2 lbs of copper squares, strips, odd shaped pieces, and cut-offs. Some of the copper is beginning to develop a patina or has an annealing stain, while some is just bent, wrinkled or dinged.
-
No need to try cutting down your own sheets, we save you the time and hassle. Pre-cut copper foil sheets are ideal for a variety of applications including hobby projects, crafts, architecture, engineering, medical equipment and more. They are a highly malleable and ductile metal, a good conductor of heat and electricity, and used significantly in industrial, commercial and personal applications. Pre-cut copper sheets are great for many DIY projects as it is malleable but yet firm.
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU
-
0.7 Mil Copper Foil also referred to as half-ounce copper is used extensively in electrical applications.
Key Features
- .7 Mil (.0007" inches)
- ½ Oz Copper – 110 annealed (dead soft)
- ASTM-B152
- Min 99.9% CU
- Sold as 12 Lb. Rolls
-
This is high quality 1 Mil (.001 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability and beauty. Available in widths of 6", 12" and 18" and lengths of 5 ft, 10 ft, 20 ft and 50 ft.
Copper Specifications
- 1 Mil (.001 inch) Rolled Copper Foil
- 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
- ASTM-B152
- Min 99.9% CU density
Key Features
- Approximately 2 times as thick as an average household aluminum foil (i.e., .0005") or approximately 25% the thickness of a sheet of copier paper (.004").
- Easy to cut with scissors or paper cutter.
- Tears by hand.
- Dead soft, very pliable.
- Very thin. Similar in thickness to extra heavy-duty aluminum foil. If this were glued to wood, the grain and imperfections in the wood will show through the copper.
- Often used for punching, scrapbooking, and other papercrafts.
- Veneer work.
- Has a wide range of applications based on workability and beauty.
