Call us today! 1-866-CUFOILS (1-866-283-6457)

  • Pre-Cut Copper Foil Sheets

    $34.00$145.00
    No need to try cutting down your own sheets, we save you the time and hassle. Pre-cut copper foil sheets are ideal for a variety of applications including hobby projects, crafts, architecture, engineering, medical equipment and more. They are a highly malleable and ductile metal, a good conductor of heat and electricity, and used significantly in industrial, commercial and personal applications. Pre-cut copper sheets are great for many DIY projects as it is malleable but yet firm.
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU
  • Other Foils - For R&D Projects that are in the testing phase or short run projects, we hold the following Mils in inventory for quick turn-around.
    • Half Ounce Copper Foil .7 Mil (.0007" x 12" wide)
    • 4 Mil PSA (Pressure Sensitive Adhesive;.004" x 12" wide x 36" long)
    • .005 inch (.005" x 2" wide).
    All foils are 110 annealed, 99.9% CU Density, and bare commercial finish. Available in 25 pound rolls, 3" ID.
  • Grab Bag

    $38.00
    Nimrod Copper Grab Bag! The Nimrod Copper Grab bag is a great value to crafters who need odd-size pieces of copper for the low price of $29.00 USD. If you are an incidental copper user, this grab-bag of copper foil is perfect for your ad hoc projects. Each Nimrod Copper Grab Bag contains about 1-2 lbs of copper squares, strips, odd shaped pieces, and cut-offs. Some of the copper is beginning to develop a patina or has an annealing stain, while some is just bent, wrinkled or dinged.
  • Pure Copper Tacks feature a flat head, sharp point, tapered body, and an angular cut shank to resist pull-out.
    • CU 110 (99.9%)
  • Copper Nails are best described as having a large, flat head, annular ring and diamond points. They are frequently used on projects such as roof flashing and other roofing installations.
    • Pure Copper
    • CU110 (99.9%)
    • Flat Head
    • 11 Gauge
  • Conductive Copper Tape

    $60.00$3,320.00
    Conductive Copper Tape consists of a .0014" (1.4 mil) thick 110 annealed electrolytic tough pitch copper that is highly conductive backed by a 2 Mil electrically conductive acrylic transfer adhesive. This copper adhesive tape is designed for laminating to a variety of surfaces including painted surfaces, metals, and various plastic films. It features good chemical resistance and has moderate tack and high shear strength.
    • Adhesive thickness: 2 Mils.
    • Width: 3"
    • Liner type: 76# Polycoated.
    • Peel adhesion (PSTC - 101/180°)
    • Initial to SS (20 min @ RT) — Oz./Inch: 47 & N/25mm: 13.2.
    • Holding power (PSTC 107 Mod./178°) 2.2 PSI (1" x 1" x 1000g) @ RT — ≥ 600 min.
    • Volume resistivity (ASTM D2739-97 Modified): 0.06Ω·m
    • Observed resistance (ASTM D2739-97 Modified): 5m Ω
  • Bulk Copper Rolls

    $448.00$892.00
    Copper rolls are available in 12, 25, and 50-pound rolls. Please note that only .7 Mil copper is available in 12 lb. rolls. All other rolls are 25 pounds. 16 and 22 Mil gauge features 25 and 50-pound rolls.
  • 8 Mil Copper Foils (.008)

    $47.00$461.00
    This is high quality 8 Mil Copper Foil (.008) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 8 Mil (.008 inch, 32 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP) dead soft
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Twice as thick as two sheets of copier paper.
    • More sturdy than 7 Mil copper foil but still retaining pliabilty.
    • Cuts with scissors or paper cutter.
    • Can be hammered, texturized or punched.
    • Used for many outside or inside projects.
    • A good substitute for 7 Mil when just a little thicker material is desired.
    • A good substitute for 10 Mil when just a little thinner material is required.
    • There are many applications based on workability and beauty.
  • 7 Mil Copper Foils (.007)

    $46.00$466.00
    This is high quality 7 Mil Copper Foil (.007) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 7 Mil (.007 inch, approx 33 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Thinner than the thickness of two sheets of copier paper and sturdier than 5 Mil copper foil but retaining pliabilty.
    • Cuts with scissors or paper cutter.
    • Can be hammered, texturized or punched.
    • Used for many outside or inside projects.
    • A good substitute for 5 Mil when just a little more thickness is desired or on the other hand, a good substitute for 8 Mil when just a little more thinnest is required.
  • 6 Mil Copper Foils (.006)

    $40.00$461.00
    This is high quality 6 Mil Copper Foil (.006) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 6 Mil (.006 inch, approx 34 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Approximately 1.5 times as thick as copier paper.
    • More sturdy than 5 Mil copper foil but still retains pliabilty.
    • Cuts with scissors or paper cutter.
    • Can be hammered, texturized or punched.
    • Used for many outside or inside projects.
    • A good substitute for 5 Mil when a thicker material is desired.
    • A good substitute for 7 Mil when a thinner material is required.
    • There are many applications based on workability and beauty.
  • 5 Mil Copper Foils (.005)

    $37.00$448.00
    This is high quality 5 Mil Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 5 Mil (.005 inch, 36 gauge) Rolled Copper Foil
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU density

    Key Features

    • 10 times thicker than household aluminum foil.
    • Cuts with household scissors, extremely pliable.
    • Excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
    • Create designs by emboss drawing, denting, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
    • Has a wide range of applications based on workability and beauty.
  • 4 Mil Copper Foils (.004)

    $50.00$618.00
    4 Mil Gauge Copper Foil, Pre-Cut Copper Sheets and 25 lb. Bulk Rolls can all be purchased here at Nimrod Copper. 4 Mil Copper Foil (.004) is high quality copper used extensively for manufacturing and R&D projects. It has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

    Copper Specifications

    • 4 Mil (.004 inch) Rolled Copper
    • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
    • ASTM-B152
    • Min 99.9% CU

    Key Features

    • Approximately 7-8 times as thick as average household aluminum foil (i.e., .0005") or approximately the thickness of a sheet of copier paper (.004").
    • A good choice when 5 mil (.005") seems a little too thick or heavy.
    • Easy to cut with scissors or paper cutter.
    • Does not tear by hand.
    • Dead soft, very pliable.
    • Art work, wall hanging, etc.

Title

Go to Top