Need help with an order?
Call (703) 447-6509

Electrically Conductive Copper Tape

 

1.4 Mil Copper Tape at 3" Width

Conductive Copper Tape consists of a .0014" (1.4 mil) thick 110 annealed electrolytic tough pitch copper that is highly conductive backed by a 2 Mil electrically conductive acrylic transfer adhesive. This copper adhesive tape is designed for laminating to a variety of surfaces including painted surfaces, metals, and various plastic films. It features good chemical resistance and has moderate tack and high shear strength.

  • Adhesive thickness: 2 Mils.
  • Liner type: 76# Polycoated.
  • Peel adhesion (PSTC - 101/180°)
  • Initial to SS (20 min @ RT) — Oz./Inch: 47 & N/25mm: 13.2.
  • Holding power (PSTC 107 Mod./178°) 2.2 PSI (1" x 1" x 1000g) @ RT — ≥ 600 min.
  • Volume resistivity (ASTM D2739-97 Modified): 0.06Ω·m
  • Observed resistance (ASTM D2739-97 Modified): 5m Ω
Part Number Price
CT1.4/3-10 3 inches 10 ft $38.00
CT1.4/3-20 3 inches 20 ft $53.00
CT1.4/3-50 3 inches 50 ft $126.00
CT1.4/3-180 3 inches 180 ft $376.00

1.4 Mil Copper Tape at 24" Width

Part Number Price
CT1.4/24-10 24 inches 10 ft $192.00
CT1.4/24-20 24 inches 20 ft $364.00
CT1.4/24-50 24 inches 50 ft $864.00
CT1.4/24-150 24 inches 150 ft $2,160.00

5 Mil Copper Tape at 4" Width

Conductive Copper Tape consists of a 5 mil (.005") thick 110 annealed electrolytic tough pitch copper that is highly conductive backed by a 2 Mil electrically conductive acrylic transfer adhesive. The adhesive is designed for laminating to a variety of surfaces including painted surfaces, metals, and various plastic films. It features good chemical resistance and has moderate tack and high shear strength.

  • Adhesive thickness: 2 Mils.
  • Liner type: 76# Polycoated.
  • Peel adhesion (PSTC - 101/180°)
  • Initial to SS (20 min @ RT) — Oz./Inch: 47 & N/25mm: 13.2.
  • Holding power (PSTC 107 Mod./178°) 2.2 PSI (1" x 1" x 1000g) @ RT — ≥ 600 min.
  • Volume resistivity (ASTM D2739-97 Modified): 0.06Ω·m
  • Observed resistance (ASTM D2739-97 Modified): 5m Ω.
  • Minimum application temperature: 50 Degrees F.
  • No load applied, service temperature range: -40 - 250 Degrees F.
Part Number Price
CT5/4-10 4 inches 10 ft $56.00
CT5/4-20 4 inches 20 ft $107.00
CT5/4-50 4 inches 50 ft $253.00
CT5/4-75 4 inches 75 ft $316.00

Customers receive a 5% discount on orders over $350

All Rights Reserved 2017, nimrodcopper.com - Admin Login
Note: All information, recommendations, and suggestions contained herein shall only be used as a guide by the Purchaser and not for specification or any other purposes. This information also does not constitute a warranty nor guaranty of any type whatsoever. Purchaser should independently determine suitability of all material purchased and must confirm adaptability and other characteristics by conducting their own tests. Nimrod Copper Inc. shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser's reliance on the information.