Need help with an order?
Call (703) 447-6509

8 Mil Copper Foils (.008)

This is high quality 8 Mil Copper Foil (.008) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

  • 8 Mil (.008 inch, 32 gauge) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP) dead soft
  • ASTM-B152
  • Min 99.9% CU

Key Features

  • Twice as thick as two sheets of copier paper.
  • More sturdy than 7 Mil copper foil but still retaining pliabilty.
  • Cuts with scissors or paper cutter.
  • Can be hammered, texturized or punched.
  • Used for many outside or inside projects.
  • A good substitute for 7 Mil when just a little thicker material is desired.
  • A good substitute for 10 Mil when just a little thinner material is required.
  • There are many applications based on workability and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

8 Mil Copper Foil Standard Rolls

Part Number Price
CR8/6-5 6 inches 5 ft $35.00
CR8/6-10 6 inches 10 ft $65.00
CR8/6-20 6 inches 20 ft $132.00
CR8/12-5 12 inches 5 ft $65.00
CR8/12-10 12 inches 10 ft $89.00
CR8/12-20 12 inches 20 ft $138.00
CR8/18-5 18 inches 5 ft $85.00
CR8/18-10 18 inches 10 ft $127.00
CR8/18-20 18 inches 20 ft $280.00
CR8/24-5 24 inches 5 ft $124.00
CR8/24-10 24 inches 10 ft $185.00
CR8/24-20 24 inches 20 ft $349.00

8 Mil Copper Foil - 25 lb Rolls

Part Number Price
CR8/6-25#

25 lb. roll

6 inches 135 ft $349.00
CR8/12-25#

25 lb. roll

12 inches 67.5 ft $349.00
CR8/18-25#

25 lb. roll

18 inches 41 ft $349.00
CR8/24-25#

25 lb. roll

24 inches 33 ft $349.00

8 Mil Pre-Cut Copper Sheets

Part Number Price
CS8/6

6" x 6" - 12 sheets per pack

$60.00
CS8/8

6" x 8" - 12 sheets per pack

$59.00
CS8/12

12" x 12" - 6 sheets per pack

$61.00
CS8/18

18" x 18" - 3 sheets per pack

$90.00
CS8/24

24" x 24" - 3 sheets per pack

$110.00

Customers receive a 5% discount on orders over $350

All Rights Reserved 2017, nimrodcopper.com - Admin Login
Note: All information, recommendations, and suggestions contained herein shall only be used as a guide by the Purchaser and not for specification or any other purposes. This information also does not constitute a warranty nor guaranty of any type whatsoever. Purchaser should independently determine suitability of all material purchased and must confirm adaptability and other characteristics by conducting their own tests. Nimrod Copper Inc. shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser's reliance on the information.