Need help with an order?
Call (703) 447-6509

7 Mil Copper Foils (.007)

This is high quality 7 Mil Copper Foil (.007) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 7 Mil (.007 inch, approx 33 gauge) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU

Key Features

  • Thinner than the thickness of two sheets of copier paper and sturdier than 5 Mil copper foil but retaining pliabilty.
  • Cuts with scissors or paper cutter.
  • Can be hammered, texturized or punched.
  • Used for many outside or inside projects.
  • A good substitute for 5 Mil when just a little more thickness is desired or on the other hand, a good substitute for 8 Mil when just a little more thinnest is required.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

7 Mil Copper Foil Standard Rolls

Part Number Price
CR7/6-5 6 inches 5 ft $34.00
CR7/6-10 6 inches 10 ft $58.00
CR7/6-20 6 inches 20 ft $87.00
CR7/12-5 12 inches 5 ft $36.00
CR7/12-10 12 inches 10 ft $67.00
CR7/12-20 12 inches 20 ft $170.00
CR7/18-5 18 inches 5 ft $54.00
CR7/18-10 18 inches 10 ft $98.00
CR7/18-20 18 inches 20 ft $245.00
CR7/24-5 24 inches 5 ft $70.00
CR7/24-10 24 inches 10 ft $130.00
CR7/24-20 24 inches 20 ft $331.00

7 Mil Copper Foil - 25 lb. Rolls

Part Number Price
CR7/6-25#

25 lb. roll

6 inches 151 ft $352.00
CR7/12-25#

25 lb. roll

12 inches 75 ft $352.00
CR7/18-25#

25 lb. roll

18 inches 50 ft $352.00
CR7/24-25#

25 lb. roll

24 inches 38 ft $352.00

7 Mil Pre-Cut Copper Sheets

Part Number Price
CS7/6

6" x 6" - 12 sheets per pack

$54.00
CS7/8

6" x 8" - 12 sheets per pack

$58.00
CS7/12

12" x 12" - 6 sheets per pack

$63.00

Customers receive a 5% discount on orders over $350

All Rights Reserved 2017, nimrodcopper.com - Admin Login
Note: All information, recommendations, and suggestions contained herein shall only be used as a guide by the Purchaser and not for specification or any other purposes. This information also does not constitute a warranty nor guaranty of any type whatsoever. Purchaser should independently determine suitability of all material purchased and must confirm adaptability and other characteristics by conducting their own tests. Nimrod Copper Inc. shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser's reliance on the information.