Need help with an order?
Call (703) 447-6509

2 Mil Copper Foils (.002)

2 Mil Copper Foils (.002) is a high quality copper that offers a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 2 Mil (.002 inch) Rolled Copper
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU 

Key Features

  • Approximately 4 times as thick as average household aluminum foil (i.e., .0005") or approximately half the thickness of a sheet of copier paper (.004"). Easy to cut with scissors or paper cutter.
  • Does not tear by hand.
  • Dead soft, very pliable.
  • Thick enough, so when glued to a backing-board, wood grain does not show through.
  • Often used for punching, scrapbooking and other paper crafts.
  • Veneer work.
  • Has a wide range of applications based on workabilty and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

2 Mil Copper Foil Standard Rolls

Part Number Price
CR2/6-5 6 inches 5 ft $49.00
CR2/6-10 6 inches 10 ft $82.00
CR2/6-20 6 inches 20 ft $165.00
CR2/12-5 12 inches 5 ft $52.00
CR2/12-10 12 inches 10 ft $95.00
CR2/12-20 12 inches 20 ft $212.00
CR2/18-5 18 inches 5 ft $67.00
CR2/18-10 18 inches 10 ft $113.00
CR2/18-20 18 inches 20 ft $237.00
CR2/24-5 24 inches 5 ft $93.00
CR2/24-10 24 inches 10 ft $165.00
CR2/24-20 24 inches 20 ft $299.00

2 Mil Copper Foil - 25 lb. Rolls

Part Number Price
CR2/24-25#

25 lb. roll

24 inches 135 ft $530.00
CR2/18-25#

25 lb. roll

18 inches 180 ft $530.00
CR2/12-25#

25 lb. roll

12 inches 270 ft $530.00
CR2/6-25#

25 lb. roll

6 inches 540 ft $530.00

2 Mil Pre-Cut Copper Sheets

Part Number Price
CS2/6

6" x 6" - 12 sheets per pack

$68.00
CS2/8

6" x 8" - 12 sheets per pack

$77.00
CS2/12

12" x 12" - 6 sheets per pack

$82.00

Customers receive a 5% discount on orders over $350

All Rights Reserved 2017, nimrodcopper.com - Admin Login
Note: All information, recommendations, and suggestions contained herein shall only be used as a guide by the Purchaser and not for specification or any other purposes. This information also does not constitute a warranty nor guaranty of any type whatsoever. Purchaser should independently determine suitability of all material purchased and must confirm adaptability and other characteristics by conducting their own tests. Nimrod Copper Inc. shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser's reliance on the information.