Need help with an order?
Call (703) 447-6509

1 Mil Copper Foils (.001)

This is high quality 1 Mil (.001 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability and beauty. Available in widths of 6", 12" and 18" and lengths of 5 ft, 10 ft, 20 ft and 50 ft.

Copper Specifications

  • 1 Mil (.001 inch) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU density

Key Features:

  • Approximately 2 times as thick as average household aluminum foil (i.e., .0005") or approximately 25% the thickness of a sheet of copier paper (.004").
  • Easy to cut with scissors or paper cutter.
  • Tears by hand.
  • Dead soft, very pliable.
  • Thin enough, so when glued to a backing-board, wood grain or imperfections will show through.
  • Often used for punching, scrapbooking and other paper crafts.
  • Veneer work.
  • Has a wide range of applications based on workabilty and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

1 Mil Copper Foil Standard Rolls

Part Number Price
CR1/6-5 6 inches 5 ft $30.00
CR1/6-10 6 inches 10 ft $43.00
CR1/6-20 6 inches 20 ft $88.00
CR1/6-50 6 inches 50 ft $140.00
CR1/12-5 12 inches 5 ft $36.00
CR1/12-10 12 inches 10 ft $51.00
CR1/12-20 12 inches 20 ft $101.00
CR1/12-50 12 inches 50 ft $196.00
CR1/18-5 18 inches 5 ft $40.00
CR1/18-10 18 inches 10 ft $54.00
CR1/18-20 18 inches 20 ft $129.00
CR1/18-50 18 inches 50 ft $232.00

1 Mil Copper Foil - 25 lb. Rolls

Part Number Price
CR1/6-25#

25 lb. roll

6 inches 1089 ft $649.00
CR1/12-25#

25 lb. roll

12 inches 543 ft $649.00
CR1/18-25#

25 lb. roll

18 inches 359 ft $649.00

1 Mil Pre-Cut Copper Sheets

Part Number Price
CS1/6

6" x 6" - 12 sheets per pack

$40.00
CS1/8

6" x 8" - 12 sheets per pack

$45.00
CS1/12

12" x 12" - 6 sheets per pack

$48.00

Customers receive a 5% discount on orders over $350

All Rights Reserved 2017, nimrodcopper.com - Admin Login
Note: All information, recommendations, and suggestions contained herein shall only be used as a guide by the Purchaser and not for specification or any other purposes. This information also does not constitute a warranty nor guaranty of any type whatsoever. Purchaser should independently determine suitability of all material purchased and must confirm adaptability and other characteristics by conducting their own tests. Nimrod Copper Inc. shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser's reliance on the information.