Need help with an order?
Call (703) 447-6509

Shop

0.7 Mil Copper Foils (.0007)

0.7 Mil Copper Foil also referred to as half ounce copper is used extensively in electrical applications. Need help with an order?

COPPER FEATURES:

  • .7 Mil (.0007" inches)
  • 1/2 oz. Rolled Copper (110-anneal (dead soft)
  • ASTM-B152
  • Min 99.9% CU

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

1 Mil Copper Foils (.001)

This is high quality 1 Mil (.001 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability and beauty. Available in widths of 6", 12" and 18" and lengths of 5 ft, 10 ft, 20 ft and 50 ft.

Copper Specifications

  • 1 Mil (.001 inch) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU density

Key Features:

  • Approximately 2 times as thick as average household aluminum foil (i.e., .0005") or approximately 25% the thickness of a sheet of copier paper (.004").
  • Easy to cut with scissors or paper cutter.
  • Tears by hand.
  • Dead soft, very pliable.
  • Thin enough, so when glued to a backing-board, wood grain or imperfections will show through.
  • Often used for punching, scrapbooking and other paper crafts.
  • Veneer work.
  • Has a wide range of applications based on workabilty and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

1.4 Mil Copper Foils (.0014)


1.4 Mil (.0014 inch) Rolled Copper used extensively in electrical Applications. This is high quality copper foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty. Also known as "One Ounce Copper," due to the fact that one square foot weights 1 Ounce.

Copper Specifications

  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU  

Key Features

  • Approximately 3 times as thick as average household aluminum foil (i.e., .0005") or approximately half the thickness of a sheet of copier paper (.004").
  • Easy to cut with scissors or paper cutter.
  • Does not tear by hand.
  • Dead soft, very pliable.
  • Thick enough, so when glued to a backing-board, wood grain does not show through.
  • Often used for punching, scrapbooking and other paper crafts.
  • Veneer work.
  • Has a wide range of applications based on workabilty and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

2 Mil Copper Foils (.002)

2 Mil Copper Foils (.002) is a high quality copper that offers a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 2 Mil (.002 inch) Rolled Copper
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU 

Key Features

  • Approximately 4 times as thick as average household aluminum foil (i.e., .0005") or approximately half the thickness of a sheet of copier paper (.004"). Easy to cut with scissors or paper cutter.
  • Does not tear by hand.
  • Dead soft, very pliable.
  • Thick enough, so when glued to a backing-board, wood grain does not show through.
  • Often used for punching, scrapbooking and other paper crafts.
  • Veneer work.
  • Has a wide range of applications based on workabilty and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

3 Mil Copper Foils (.003)

This is high quality 3 Mil (.003 inch) Rolled Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 3 Mil (.003 inch) Rolled Copper
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU

Key Features

  • Approximately 6 times as thick as average household aluminum foil (i.e., .0005") or approximately 3/4 the thickness of a sheet of copier paper (.004").
  • Easy to cut with scissors or paper cutter.
  • Does not tear by hand.
  • Dead soft, very pliable.
  • Thick enough, so when glued to a backing-board, wood grain does not show through.
  • 3 Mil is excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
  • Create designs by emboss drawing, denting, punching, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
  • Veneer work, furniture.
  • Scrap booking.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

4 Mil Copper Foils (.004)

4 Mil Gauge Copper Foil, Pre-Cut Copper Sheets and 25 lb. Bulk Rolls can all be purchased here at Nimrod Copper. 4 Mil Copper Foil (.004) is high quality copper used extensively for manufacturing and R&D projects. It has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 4 Mil (.004 inch) Rolled Copper
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU

Key Features

  • Approximately 7-8 times as thick as average household aluminum foil (i.e., .0005") or approximately the thickness of a sheet of copier paper (.004").
  • A good choice when 5 mil (.005") seems a little too thick or heavy.
  • Easy to cut with scissors or paper cutter.
  • Does not tear by hand.
  • Dead soft, very pliable.
  • Art work, wall hanging, etc.

4 Mil is excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure. Use it to create designs by emboss drawing, denting, punching, piercing, rub-transferring, tracing, origami, and hammering (Repousse). 

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

5 Mil Copper Foils (.005)

This is high quality 5 Mil Copper Foil and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 5 Mil (.005 inch, 36 gauge) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU density

Key Features

  • 10 times thicker than household aluminum foil.
  • Cuts with household scissors, extremely pliable.
  • Excellent for tooling and will dent easily with a light touch but will not hold its shape under pressure.
  • Create designs by emboss drawing, denting, piercing, rub-transferring, tracing, origami, and hammering (Repousse).
  • Has a wide range of applications based on workability and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

6 Mil Copper Foils (.006)

This is high quality 6 Mil Copper Foil (.006) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 6 Mil (.006 inch, approx 34 gauge) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU 

Key Features

  • Approximately 1.5 times as thick as copier paper.
  • More sturdy than 5 Mil copper foil but still retains pliabilty.
  • Cuts with scissors or paper cutter.
  • Can be hammered, texturized or punched.
  • Used for many outside or inside projects.
  • A good substitute for 5 Mil when a thicker material is desired.
  • A good substitute for 7 Mil when a thinner material is required.
  • There are many applications based on workability and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

7 Mil Copper Foils (.007)

This is high quality 7 Mil Copper Foil (.007) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 7 Mil (.007 inch, approx 33 gauge) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU

Key Features

  • Thinner than the thickness of two sheets of copier paper and sturdier than 5 Mil copper foil but retaining pliabilty.
  • Cuts with scissors or paper cutter.
  • Can be hammered, texturized or punched.
  • Used for many outside or inside projects.
  • A good substitute for 5 Mil when just a little more thickness is desired or on the other hand, a good substitute for 8 Mil when just a little more thinnest is required.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

8 Mil Copper Foils (.008)

This is high quality 8 Mil Copper Foil (.008) with a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

  • 8 Mil (.008 inch, 32 gauge) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP) dead soft
  • ASTM-B152
  • Min 99.9% CU

Key Features

  • Twice as thick as two sheets of copier paper.
  • More sturdy than 7 Mil copper foil but still retaining pliabilty.
  • Cuts with scissors or paper cutter.
  • Can be hammered, texturized or punched.
  • Used for many outside or inside projects.
  • A good substitute for 7 Mil when just a little thicker material is desired.
  • A good substitute for 10 Mil when just a little thinner material is required.
  • There are many applications based on workability and beauty.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

10 Mil Copper Foils (.01)

This is high quality 10 Mil Copper Foil (.01) has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 10 Mil (.010 inches, 30 gauge) Rolled Copper
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU 

Key Features

  • Approximately 2.5 times thicker than a sheet of copier paper (.004").
  • Pliable enough to bend into 90 degree angles by hand yet holds its shape.
  • Cuts with heavy duty scissors.
  • It can be hammered or texturized.
  • Used in many quality craft work, such as, jewerly making, outdoor/garden projects, especially to protect wood.
  • Used in covering furniture or as an inset for wooden cabinets. Indoor waterfalls, sculpture, home, etc.

    Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.
Part Number Price

16 Mil Copper Foils (.016)

This is high quality 16 Mil Copper Foils (.016) and has a wide range of applications based on conductivity, corrosion resistance, workability, and beauty.

Copper Specifications

  • 16 Mil (.016 inches,12 oz/sq ft, 26 gauge) Rolled Copper Foil
  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU 

Key Features

  • Can be formed by hand and will hold weight.
  • Cuts with tin snips or shears.
  • Used for roofing projects, flashing, cupolas, and other outdoor projects.
  • It is durable.
  • Often used in outside craft projects and jewelry making.

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

22 Mil Copper Foils (.022)

22 Mil (.0216 inches, 24 gauge, 16 Oz) Copper Foils are often used in a number of flashing applications. Commonly referred to as "roofing flashing" or "roofing copper"  It is the preferred thickness for many roofing and flashing projects as well as DIY projects, electrical applications, and R&D. It can be shaped by hand but metal snips are needed to cut it.

Copper Specifications

  • This copper is premium, high quality material.
  • Copper Density is 99.9% CU110-anneal (dead soft)
  • ASTM-B152
  • It is non-coated, has a bare commercial finish.

22 Mil Copper Foils are available in our standard 50 pound coils (rolls) with a 12" ID Core, so it rolls out pretty smooth. If you purchase 2 or more coils, you get a 5% discount. 100 pound and 200 pound coils are also available but you must email for the quote. 

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

Bulk Copper Foil Rolls

Nimrod Copper's bulk copper foil rolls are available in a variety of sizes to ensure you have the copper you need for your industrial, commercial or personal project. Each thickness provides a different malleability as well as workability.

  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU 

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

 

Part Number Price

Pre-Cut Copper Foil Sheets

No need to try cutting down your own sheets, we save you the time and hassle. Pre-cut copper foil sheets are ideal for a variety of applications including hobby projects, crafts, architecture, engineering, medical equipment and more. They are a highly malleable and ductile metal, a good conductor of heat and electricity, and used significantly in industrial, commercial and personal applications. Pre-cut copper sheets are great for many DIY projects as it is malleable but yet firm. 

  • 110-anneal (Electrolytic Tough Pitch or ETP, dead soft)
  • ASTM-B152
  • Min 99.9% CU 

Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

Part Number Price

Electrically Conductive Copper Tape

 

Part Number Price

Other Copper Foil Products

Other Foils - For R&D Projects that are in the testing phase or short run projects, we hold the following Mils in inventory for quick turn-around.

  • Half Ounce Copper Foil .7 Mil (.0007" x 12" wide)
  • 4 Mil PSA (Pressure Sensitive Adhesive;.004" x 12" wide x 36" long)
  • .005 inch (.005" x 2" wide).

All foils are 110 annealed, 99.9% CU Density, and bare commercial finish. Available in 25 pound rolls, 3" ID.

Part Number Price

Copper Nails

Copper Nails are best described as having a large, flat head, annular ring and diamond points. They are frequently used on projects such as roof flashing and other roofing installations. Need help with an order? Please call us at (703) 447-6509 and we will be glad to help or email us at  sales@nimrodcopper.com.

  • Pure Copper
  • CU110 (99.9%)
  • Flat Head
  • 11 Gauge
Part Number Price

Copper Tacks

Pure Copper Tacks feature a flat head, sharp point, tapered body, and an angular cut shank to resist pull-out. Need help with an order? Call us at the number above or email us at  sales@nimrodcopper.com

  • CU 110 (99.9%)
Part Number Price

Special Offers

Part Number Price

Customers receive a 5% discount on orders over $350

All Rights Reserved 2018, nimrodcopper.com - Admin Login
Note: All information, recommendations, and suggestions contained herein shall only be used as a guide by the Purchaser and not for specification or any other purposes. This information also does not constitute a warranty nor guaranty of any type whatsoever. Purchaser should independently determine suitability of all material purchased and must confirm adaptability and other characteristics by conducting their own tests. Nimrod Copper Inc. shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser's reliance on the information.